dmesg - Intel Pentium E5800

Return To Intel Pentium E5800 System Information

CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.8.3-1-MANJARO (builduser@manjaro) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Fri Jul 10 22:42:46 UTC 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf69ffff] usable
BIOS-e820: [mem 0x00000000cf6a0000-0x00000000cf6adfff] ACPI data
BIOS-e820: [mem 0x00000000cf6ae000-0x00000000cf6effff] ACPI NVS
BIOS-e820: [mem 0x00000000cf6f0000-0x00000000cf6fdfff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: ECS P43G/P43G, BIOS 080014  07/31/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CBFFF write-protect
  CC000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 100000000 mask FE0000000 write-back
  2 base 120000000 mask FF0000000 write-back
  3 base 0D0000000 mask FF0000000 uncachable
  4 base 0E0000000 mask FE0000000 uncachable
  5 base 0CF700000 mask FFFF00000 uncachable
  6 base 0CF800000 mask FFF800000 uncachable
  7 disabled
PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
e820: update [mem 0xcf700000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf6a0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01b22000, 0x01b22fff] PGTABLE
BRK [0x01b23000, 0x01b23fff] PGTABLE
BRK [0x01b24000, 0x01b24fff] PGTABLE
init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
 [mem 0x12fe00000-0x12fffffff] page 2M
BRK [0x01b25000, 0x01b25fff] PGTABLE
init_memory_mapping: [mem 0x120000000-0x12fdfffff]
 [mem 0x120000000-0x12fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11fffffff]
 [mem 0x100000000-0x11fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcf69ffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0xcf5fffff] page 2M
 [mem 0xcf600000-0xcf69ffff] page 4k
RAMDISK: [mem 0x36852000-0x37420fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F9B80 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000CF6A0000 000040 (v01 073108 RSDT1331 20080731 MSFT 00000097)
ACPI: FACP 0x00000000CF6A0200 000084 (v01 073108 FACP1331 20080731 MSFT 00000097)
ACPI: DSDT 0x00000000CF6A0440 005AF2 (v01 1AAAA  1AAAA000 00000000 INTL 20051117)
ACPI: FACS 0x00000000CF6AE000 000040
ACPI: APIC 0x00000000CF6A0390 00006C (v01 073108 APIC1331 20080731 MSFT 00000097)
ACPI: MCFG 0x00000000CF6A0400 00003C (v01 073108 OEMMCFG  20080731 MSFT 00000097)
ACPI: OEMB 0x00000000CF6AE040 000071 (v01 073108 OEMB1331 20080731 MSFT 00000097)
ACPI: HPET 0x00000000CF6A5F40 000038 (v01 073108 OEMHPET  20080731 MSFT 00000097)
ACPI: GSCI 0x00000000CF6AE0C0 002024 (v01 073108 GMCHSCI  20080731 MSFT 00000097)
ACPI: SSDT 0x00000000CF6B0A10 000A7C (v01 DpgPmm CpuPm    00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
NODE_DATA(0) allocated [mem 0x12fff8000-0x12fffbfff]
 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0xcf69ffff]
  node   0: [mem 0x100000000-0x12fffffff]
Initmem setup node 0 [mem 0x00001000-0x12fffffff]
On node 0 totalpages: 1046078
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 13211 pages used for memmap
  DMA32 zone: 845472 pages, LIFO batch:31
  Normal zone: 3072 pages used for memmap
  Normal zone: 196608 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xcf800000-0xcfffffff
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcf6a0000-0xcf6adfff]
PM: Registered nosave memory: [mem 0xcf6ae000-0xcf6effff]
PM: Registered nosave memory: [mem 0xcf6f0000-0xcf6fdfff]
PM: Registered nosave memory: [mem 0xcf6fe000-0xcf7fffff]
PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88012fc00000 s85376 r8192 d29312 u524288
pcpu-alloc: s85376 r8192 d29312 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029710
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4028364K/4184312K available (5602K kernel code, 862K rwdata, 1740K rodata, 1160K init, 1152K bss, 155948K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:8448 nr_irqs:456 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3192.111 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6386.23 BogoMIPS (lpj=10640370)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys bfqio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
               Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff819fb000 - ffffffff81a00000)
ftrace: allocating 21176 entries in 83 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Pentium(R) Dual-Core  CPU      E5800  @ 3.20GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (12773.46 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xcf6ae000-0xcf6effff] (270336 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time:  2:48:11, date: 08/15/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88012B08B800 0002FB (v01 DpgPmm P001Ist  00000011 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88012B08BC00 0002FB (v01 DpgPmm P002Ist  00000012 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcf700000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfea80000-0xfeafffff]
pci 0000:00:02.0: reg 0x14: [io  0xec00-0xec07]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfea78000-0xfea7bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xe880-0xe89f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xe800-0xe81f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xe480-0xe49f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0xe400-0xe41f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfea77c00-0xfea77fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io  0x0800-0x087f]: address conflict with ACPI PM1a_EVT_BLK [io  0x0800-0x0803]
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0xe080-0xe087]
pci 0000:00:1f.2: reg 0x14: [io  0xe000-0xe003]
pci 0000:00:1f.2: reg 0x18: [io  0xdc00-0xdc07]
pci 0000:00:1f.2: reg 0x1c: [io  0xd880-0xd883]
pci 0000:00:1f.2: reg 0x20: [io  0xd800-0xd80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
pci 0000:01:00.0: [1969:2048] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xcf700000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf6a0000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:02: [io  0x0a10-0x0a1f] has been reserved
system 00:02: [io  0x0a20-0x0a2f] has been reserved
system 00:02: [io  0x0a30-0x0a3f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io  0x04d0-0x04d1] has been reserved
system 00:03: [io  0x0800-0x087f] could not be reserved
system 00:03: [io  0x0480-0x04bf] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0xffc00000-0xfff7ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xcf6fffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1f.0: BAR 13: [io  0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcf700000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:02: resource 8 [mem 0xcf700000-0xdfffffff]
pci_bus 0000:02: resource 9 [mem 0xf0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 12092K (ffff880036852000 - ffff880037421000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcb6a0000-0xcf6a0000] (64MB) mapped at [ffff8800cb6a0000-ffff8800cf69ffff]
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa0b
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa0b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v7r8
pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #32 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
  Magic number: 11:136:814
rtc_cmos 00:01: setting system clock to 2015-08-15 02:48:12 UTC (1439606892)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1160K (ffffffff818d9000 - ffffffff819fb000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 532K (ffff88000157b000 - ffff880001600000)
Freeing unused kernel memory: 308K (ffff8800017b3000 - ffff880001800000)
random: systemd-tmpfile urandom read with 1 bits of entropy available
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e880
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e480
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
SCSI subsystem initialized
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1d.7: debug port 1
libata version 3.00 loaded.
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfea77c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xe080 ctl 0xe000 bmdma 0xd800 irq 19
ata4: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd808 irq 19
ata4.00: ATA-8: ST3500413AS, JC47, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: ATA-8: KINGSTON SV300S37A60G, 505ABBF1, max UDMA/133
ata3.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: ATAPI: ATAPI   iHAS122, ZL0A, max UDMA/100
ata4.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF1 PQ: 0 ANSI: 5
scsi 2:0:1:0: CD-ROM            ATAPI    iHAS122          ZL0A PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access     ATA      ST3500413AS      JC47 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sr 2:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 2:0:0:0: [sda] Attached SCSI disk
sr 2:0:1:0: Attached scsi CD-ROM sr0
 sdb: sdb1 sdb2
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 1-2: new low-speed USB device number 2 using uhci_hcd
usb 2-2: new low-speed USB device number 2 using uhci_hcd
hidraw: raw HID events driver (C) Jiri Kosina
tsc: Refined TSC clocksource calibration: 3191.999 MHz
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:040B:2000.0001/input/input2
hid-generic 0003:040B:2000.0001: input,hidraw0: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:00:1d.0-2/input0
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:046D:C05A.0002/input/input3
hid-generic 0003:046D:C05A.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2/input0
input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/0003:040B:2000.0003/input/input4
hid-generic 0003:040B:2000.0003: input,hidraw2: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:00:1d.0-2/input1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Switched to clocksource tsc
device-mapper: cache-policy-mq: version 1.3.0 loaded
floppy0: no floppy controllers found
random: nonblocking pool is initialized
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: systemd 222 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: bluetooth.service: Cannot add dependency job, ignoring: Unit bluetooth.service is masked.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Remote File Systems.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Started File System Check on Root Device.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting Temporary Directory...
FS-Cache: Loaded
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
EXT4-fs (dm-5): re-mounted. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
FS-Cache: Netfs 'nfs' registered for caching
systemd[1]: Mounted Temporary Directory.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 218 (systemd-binfmt)
systemd[1]: Mounting Arbitrary Executable File Formats File System...
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started First Boot Wizard.
systemd[1]: Started Rebuild Dynamic Linker Cache.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Started Create System Users.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounting Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Arbitrary Executable File Formats File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Starting Local File Systems (Pre).
systemd[1]: Mounted Virtual Machine and Container Storage.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Started Journal Service.
systemd-journald[212]: Received request to flush runtime journal from PID 1
agpgart-intel 0000:00:00.0: Intel G33 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
intel_rng: FWH not detected
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (30 C)
[drm] Memory usable by graphics device = 512M
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
i915: No ACPI video bus found
[drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20141107/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000828-0x0000000000000847 (\_SB_.PCI0.SBRG.PMI1) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
fbcon: inteldrmfb (fb0) is primary device
sound hdaudioC0D0: autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    dig-out=0x20/0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Rear Mic=0x1a
sound hdaudioC0D0:      Front Mic=0x1e
sound hdaudioC0D0:      Line=0x1b
sound hdaudioC0D0:      CD=0x1f
Console: switching to colour frame buffer device 170x48
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
ppdev: user-space parallel port driver
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
atl2 0000:01:00.0 ens32: renamed from eth0
gpio_ich: GPIO from 462 to 511 on gpio_ich
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
mousedev: PS/2 mouse device common for all mice
atl2: ens32 NIC Link is Up
floppy0: no floppy controllers found
fuse init (API version 7.23)
Non-volatile memory driver v1.3
QXcbEventReader[649]: segfault at 7fbcd22f6ca9 ip 00007fbcd22f6ca9 sp 00007fbcd02ffe20 error 14 in locale-archive[7fbcd27a7000+1c6000]

Return To Intel Pentium E5800 System Information